Filmography Notes on the Opening Scene of the Darjeeling Limited

Fast paced Indian music builds tension even before the opening credits have stopped rolling Establishing shot indian city, while not revealed as india at this point the viewer associates the architecture as foreign in some exotic location, one car on the road, depth created by background being out of focus and leading lines created by the road. High angle extreme long shot, zoom to reveal tracking shot of taxi cab and people in exotic attire and foreign style tricycle cabs, gives the viewer more information about setting while the tracking of the car establishes the subject of viewingInside the cab we have a rig attached to car on passenger side tracking shot representing the perspective of the passenger reveals the fare meter in the right third of the shot letting the viewer know that the car is a cab, the frame is balanced by cars and people on the left side of the street opposite the cab far meter, the frame quick pans to create a fast pacing and to reveal taxicab driver. he has a beard and is wearing a turban, a signifier of India from a western viewpoint, also is a frame within a frame because of drivers side window.From inside the car the camera is mounted on the dashboard of the cab to show the audience the passenger, Bill Murray. The taxi driver is placed in the left third while the passenger is placed in the right third, the cabs frame serves as leading lines creating depth in the frame His business man attire contrasts the taxicab driver's outfit and the setting, showing he is a foreigner in this country, the reckless maneuvering of the cab, honking and engine sounds, and the frantic look on his face tells the audience that the passenger is worried about being somewhere on time.Low angle tracking shot behind the car creates a tension and intensity by creating a feeling of the car moving faster as the camera moves further away, honking and motorcycle engine noise fading in and out create the illusion of the speed of the taxicab Close up on cab driver, then zooms in again to extreme close up to allow the audience to focus on the cab drivers intense focus, facial expressions help viewers to feel the emotions the director wishes to convey, here his intense expression and the background flying by in the frame of the window.Next shot is from bill Murray's perspective, over the shoulder shot over the cab driver looking out the center of the windshield as they race thru the busy city street, frame within a frame, shot is balanced by colorful awnings, signs, and tall buildings on the right and people in bright clothing walking on the opposite side of the street. The cab fare meter also rests on the bottom left to balance out the cab driver and steering wheel who are on the right.The camera then flips around to reveal the anxious look on bill Murray's face as he checks his watch again revealing that he is on some sort of deadline creating tension and fast pacing in the scene the back window is once again a frame within a frame and the cam era is placed at slightly below eye level, shot then switches to the cab drivers point of view though lowered to about his chest level, the steering wheel is revealed to have a symmetrical shrine like set up of beads and small paintings of people and a temple, the steering wheel frames the entire shrine like setup, the drivers hand is balanced by the red sticker on the right of the dashboard, outside of the windshield colorful and exotic scenery can be seen, shadows of cars created by natural lighting and the yellow guardrail separating the street create leading lines giving depth to the background.The next shot is a tracking shot at the front of the cab, the shot has incredible depth thanks to the leading lines of the buildings lining the street, frame centered on the taxicab as it barely misses motorcyclists and medians, close up on bill Murray's character placed in the right third of the shot, his face still showing distress, the camera then continues to bounce rapidly from the s ame shots in and around the cab to promote the sense of urgency until the cab pulls up to the entrance of a train station, the camera takes a static shot as the cab pulls in to be centered in the frame, people in vibrant Indian garb are placed evenly on either side of the car as It pulls in creating a well balanced closed frame with depth being created by the awning of the train station and the lines it creates, people also placed in foreground and background, otherwise flat frame, very still photo-like shotAs Murray's character exits the car the camera is positioned outside the cab and zoomed in on the face of the driver, the zoom is slowly pulled out to represent the movement of the subject as the passenger flees from the cab in too much of a hurry to pay, the cabbie angrily shakes his fist and screams in Indian, another indicator of setting in the opening scene The camera then follows Murray's character through the train station, in first a handheld tracking shot to create the ef fect of running like the character does and then a dolly tracking shot, people are placed in the foreground to create the feeling of crowdedness at the station and the camera follows keeping a 45 degree angle behind the subject to create leading lines in the station, the subject is also always kept in the right third to create a more interesting shot.At the ticket counter the camera is behind, people's heads cropped tightly in the frame to again create the feeling of crowdedness of the train station, the positioning of the camera gives the audience the feel of standing in line as Murray's character barges on and cuts to the front of the line saying â€Å"that's my train† finally reveals to the audience what the conflict is in this scene, pointing off screen, the characters actions and the cropping of people and the fence of the ticket counter create an open frame that leads to the next shot of the train pulling away from the station, then a sudden pan to the businessman runni ng into the frame, chasing the train ,to maintain the fast and urgent pacing. A handheld tracking shot follows Murray as he runs along the boarding platform after the train he was trying to catch, as Murray runs past the camera, the camera pans to follow behind him and reveals the train, moving slightly faster than the businessman can run The next shot then frames the back of the caboose and an Indian boy standing in the right third of the frame, the camera slowly tilts down to reveal the name of the train â€Å"the Darjeeling limited† and also the title of the movie An extreme close up profile of Murray's character as he screams wait! Wait!Murray's head hides a younger man, adrien Brody, who comes into view as he runs slightly faster past Murray. They exchange glances as brody outruns murray in a mad dash for the train. While the audience has been lead to believe that the businessman was the protagonist we were to follow on this adventure he instead falls behind Fast paced I ndian music cuts out and a slower song this time tomorrow by the kinks begins to play, the next shot is a slow motion dolly tracking shot following the train in the left third of the frame as brody's character, peter enters into the frame from the right, he catches up to the back of the train, throws his bags on, and hoists himself on the train.Natural light brightly illuminates the background, the shot is slightly over exposed to augment the intensity of the sun in the shot, His eyes can be seen looking off screen and then a close up reveals a sympathetic look on peters face, he pulls up his glasses showing that he is looking at something, the camera flips around to his perspective in a dolly shot or mount on the back of the train, the train tracks and boarding platform lead our eyes back to the businessman who has been left behind by the train, Murray's character looks exhausted and disgusted. Another close up of Peter, he smiles, grateful that he did not end up like the businessm an, also here we can see shadows closely, because of the natural lighting used throughout the lighting techniques were somewhat limited The slowing of the music and the slow motion shots bring the pacing of the film back down to the signature slow and deliberate pacing of Wes Anderson films

Healthy Eating Essay

Healthy eating tip 1: Set yourself up for success To set yourself up for success, think about planning a healthy diet as a number of small, manageable steps rather than one big drastic change. If you approach the changes gradually and with commitment, you will have a healthy diet sooner than you think. Simplify. Instead of being overly concerned with counting calories or measuring portion sizes, think of your diet in terms of color, variety, and freshness. This way it should be easier to make healthy choices. Focus on finding foods you love and easy recipes that incorporate a few fresh ingredients. Gradually, your diet will become healthier and more delicious. Start slow and make changes to your eating habits over time. Trying to make your diet healthy overnight isn’t realistic or smart. Changing everything at once usually leads to cheating or giving up on your new eating plan. Make small steps, like adding a salad (full of different color vegetables) to  your diet once a day or switching from butter to olive oil when cooking. As your small changes become habit, you can continue to add more healthy choices to your diet. Every change you make to improve your diet matters. You don’t have to be perfect and you don’t have to completely eliminate foods you enjoy to have a healthy diet. The long term goal is to feel good, have more energy, and reduce the risk of cancer and disease. Don’t let your missteps derail you—every healthy food choice you make counts. Think of water and exercise as food groups in your diet. Water. Water helps flush our systems of waste products and toxins, yet many people go through life dehydrated—causing tiredness, low energy, and headaches. It’s common to mistake thirst for hunger, so staying well hydrated will also help you make healthier food choices. Exercise. Find something active that you like to do and add it to your day, just like you would add healthy greens, blueberries, or salmon. The benefits of lifelong exercise are abundant and regular exercise may even motivate you to make healthy food choices a habit. Healthy eating tip 2: Moderation is key People often think of healthy eating as an all or nothing proposition, but a key foundation for any healthy diet is moderation. But what is moderation? How much is a moderate amount? That really depends on you and your overall eating habits. The goal of healthy eating is to develop a diet that you can maintain for life, not just a few weeks or months, or until you’ve hit your ideal weight. So try to think of moderation in terms of balance. Despite what certain fad diets would have you believe, we all need a balance of carbohydrates, protein, fat, fiber, vitamins, and minerals to sustain a healthy body. For most of us, moderation or balance means eating less than we do now. More specifically, it means eating far less of the unhealthy stuff (unrefined sugar, saturated fat, for example) and more of the healthy (such as fresh fruit and vegetables). But it doesn’t mean eliminating the foods you love. Eating bacon for breakfast once a week, for example, could be considered moderation if you follow it with a healthy lunch and dinner–but not if you follow it with a box of donuts and a sausage pizza. If you eat 100 calories  of chocolate one afternoon, balance it out by deducting 100 calories from your evening meal. If you’re still hungry, fill up with an extra serving of fresh vegetables. Try not to think of certain foods as â€Å"off-limits.† When you ban certain foods or food groups, it is natural to want those foods more, and then feel like a failure if you give in to temptation. If you are drawn towards sweet, salty, or unhealthy foods, start by reducing portion sizes and not eating them as often. Later you may find yourself craving them less or thinking of them as only occasional indulgences. Think smaller portions. Serving sizes have ballooned recently, particularly in restaurants. When dining out, choose a starter instead of an entree, split a dish with a friend, and don’t order supersized anything. At home, use smaller plates, think about serving sizes in realistic terms, and start small. If you don’t feel satisfied at the end of a meal, try adding more leafy green vegetables or rounding off the meal with fresh fruit. Visual cues can help with portion sizes–your serving of meat, fish, or chicken should be the size of a deck of cards, a slice of bread should be the size of a CD case, and half a cup of mashed potato, rice, or pasta is about the size of a traditional light bulb. Healthy eating tip 3: It’s not just what you eat, it’s how you eat Healthy eating is about more than the food on your plate—it is also about how you think about food. Healthy eating habits can be learned and it is important to slow down and think about food as nourishment rather than just something to gulp down in between meetings or on the way to pick up the kids. Eat with others whenever possible. Eating with other people has numerous social and emotional benefits—particularly for children—and allows you to model healthy eating habits. Eating in front of the TV or computer often leads to mindless overeating. Take time to chew your food and enjoy mealtimes. Chew your food slowly, savoring every bite. We tend to rush though our meals, forgetting to actually taste the flavors and feel the textures of our food. Reconnect with the joy of eating. Listen to your body. Ask yourself if you are really hungry, or have a glass of water to see if you are thirsty instead of hungry. During a meal, stop eating before you  feel full. It actually takes a few minutes for your brain to tell your body that it has had enough food, so eat slowly. Eat breakfast, and eat smaller meals throughout the day. A healthy breakfast can jumpstart your metabolism, and eating small, healthy meals throughout the day (rather than the standard three large meals) keeps your energy up and your metabolism going. Avoid eating at night. Try to eat dinner earlier in the day and then fast for 14-16 hours until breakfast the next morning. Early studies suggest that this simple dietary adjustment—eating only when you’re most active and giving your digestive system a long break each day—may help to regulate weight. After-dinner snacks tend to be high in fat and calories so are best avoided, anyway. Healthy eating tip 4: Fill up on colorful fruits and vegetables Fruits and vegetables are the foundation of a healthy diet. They are low in calories and nutrient dense, which means they are packed with vitamins, minerals, antioxidants, and fiber. Try to eat a rainbow of fruits and vegetables every day and with every meal—the brighter the better. Colorful, deeply colored fruits and vegetables contain higher concentrations of vitamins, minerals, and antioxidants—and different colors provide different benefits, so eat a variety. Aim for a minimum of five portions each day. Some great choices include: Greens. Branch out beyond bright and dark green lettuce. Kale, mustard greens, broccoli, and Chinese cabbage are just a few of the options—all packed with calcium, magnesium, iron, potassium, zinc, and vitamins A, C, E, and K. Sweet vegetables. Naturally sweet vegetables—such as corn, carrots, beets, sweet potatoes, yams, onions, and squash—add healthy sweetness to your meals and reduce your cravings for other sweets. Fruit. Fruit is a tasty, satisfying way to fill up on fiber, vitamins, and antioxidants. Berries are cancer-fighting, apples provide fiber, oranges and mangos offer vitamin C, and so on. The importance of getting vitamins from food—not pills The antioxidants and other nutrients in fruits and vegetables help protect against certain types of cancer and other diseases. And while advertisements  abound for supplements promising to deliver the nutritional benefits of fruits and vegetables in pill or powder form, research suggests that it’s just not the same. A daily regimen of nutritional supplements is not going to have the same impact of eating right. That’s because the benefits of fruits and vegetables don’t come from a single vitamin or an isolated antioxidant. The health benefits of fruits and vegetables come from numerous vitamins, minerals, and phytochemicals working together synergistically. They can’t be broken down into the sum of their parts or replicated in pill form. Healthy eating tip 5: Eat more healthy carbs and whole grains Choose healthy carbohydrates and fiber sources, especially whole grains, for long lasting energy. In addition to being delicious and satisfying, whole grains are rich in phytochemicals and antioxidants, which help to protect against coronary heart disease, certain cancers, and diabetes. Studies have shown people who eat more whole grains tend to have a healthier heart. A quick definition of healthy carbs and unhealthy carbs Healthy carbs (sometimes known as good carbs) include whole grains, beans, fruits, and vegetables. Healthy carbs are digested slowly, helping you feel full longer and keeping blood sugar and insulin levels stable. Unhealthy carbs (or bad carbs) are foods such as white flour, refined sugar, and white rice that have been stripped of all bran, fiber, and nutrients. Unhealthy carbs digest quickly and cause spikes in blood sugar levels and energy. Tips for eating more healthy carbs Include a variety of whole grains in your healthy diet, including whole wheat, brown rice, millet, quinoa, and barley. Experiment with different grains to find your favorites. Make sure you’re really getting whole grains. Be aware that the words stone-ground, multi-grain, 100% wheat, or bran can  be deceptive. Look for the words â€Å"whole grain† or â€Å"100% whole wheat† at the beginning of the ingredient list. In the U.S., Canada, and some other countries, check for the Whole Grain Stamps that distinguish between partial whole grain and 100% whole grain. Try mixing grains as a first step to switching to whole grains. If whole grains like brown rice and whole wheat pasta don’t sound good at first, start by mixing what you normally use with the whole grains. You can gradually increase the whole grain to 100%. Avoid: Refined foods such as breads, pastas, and breakfast cereals that are not whole grain. Healthy eating tip 6: Enjoy healthy fats & avoid unhealthy fats Good sources of healthy fat are needed to nourish your brain, heart, and cells, as well as your hair, skin, and nails. Foods rich in certain omega-3 fats called EPA and DHA are particularly important and can reduce cardiovascular disease, improve your mood, and help prevent dementia. Add to your healthy diet: Monounsaturated fats, from plant oils like canola oil, peanut oil, and olive oil, as well as avocados, nuts (like almonds, hazelnuts, and pecans), and seeds (such as pumpkin, sesame). Polyunsaturated fats, including Omega-3 and Omega-6 fatty acids, found in fatty fish such as salmon, herring, mackerel, anchovies, sardines, and some cold water fish oil supplements. Other sources of polyunsaturated fats are unheated sunflower, corn, soybean, flaxseed oils, and walnuts. Reduce or eliminate from your diet: Saturated fats, found primarily in animal sources including red meat and whole milk dairy products. Trans fats, found in vegetable shortenings, some margarines, crackers, candies, cookies, snack foods, fried foods, baked goods, and other processed foods made with partially hydrogenated vegetable oils. Healthy eating tip 7: Put protein in perspective Protein gives us the energy to get up and go—and keep going. Protein in food is broken down into the 20 amino acids that are the body’s basic building blocks for growth and energy, and essential for maintaining cells, tissues, and organs. A lack of protein in our diet can slow growth, reduce muscle  mass, lower immunity, and weaken the heart and respiratory system. Protein is particularly important for children, whose bodies are growing and changing daily. Here are some guidelines for including protein in your healthy diet: Try different types of protein. Whether or not you are a vegetarian, trying different protein sources—such as beans, nuts, seeds, peas, tofu, and soy products—will open up new options for healthy mealtimes. Beans: Black beans, navy beans, garbanzos, and lentils are good options. Nuts: Almonds, walnuts, pistachios, and pecans are great choices. Soy products: Try tofu, soy milk, tempeh, and veggie burgers for a change. Avoid salted or sugary nuts and refried beans. Downsize your portions of protein. Many people in the West eat too much protein. Try to move away from protein being the center of your meal. Focus on equal servings of protein, whole grains, and vegetables. Focus on quality sources of protein, like fresh fish, chicken or turkey, tofu, eggs, beans, or nuts. When you are having meat, chicken, or turkey, buy meat that is free of hormones and antibiotics. Healthy eating tip 8: Add calcium for strong bones Calcium is one of the key nutrients that your body needs in order to stay strong and healthy. It is an essential building block for lifelong bone health in both men and women, as well as many other important functions. You and your bones will benefit from eating plenty of calcium-rich foods, limiting foods that deplete your body’s calcium stores, and getting your daily dose of magnesium and vitamins D and K—nutrients that help calcium do its job. Recommended calcium levels are 1000 mg per day, 1200 mg if you are over 50 years old. Take a vitamin D and calcium supplement if you don’t get enough of these nutrients from your diet. Good sources of calcium include: Dairy: Dairy products are rich in calcium in a form that is easily digested and absorbed by the body. Sources include milk, yogurt, and cheese. Vegetables and greens: Many vegetables, especially leafy green ones, are rich sources of calcium. Try turnip greens, mustard greens, collard greens, kale, romaine lettuce, celery, broccoli, fennel, cabbage, summer squash, green beans, Brussels sprouts, asparagus, and crimini mushrooms. Beans: For another rich source of calcium, try black beans, pinto beans, kidney beans, white beans, black-eyed peas, or baked beans. Healthy eating tip 9: Limit sugar and salt If you succeed in planning your diet around fiber-rich fruits, vegetables, whole grains, lean protein, and good fats, you may find yourself naturally cutting back on foods that can get in the way of your healthy diet—sugar and salt. Sugar Sugar causes energy ups and downs and can add to health and weight problems. Unfortunately, reducing the amount of candy, cakes, and desserts we eat is only part of the solution. Often you may not even be aware of the amount of sugar you’re consuming each day. Large amounts of added sugar can be hidden in foods such as bread, canned soups and vegetables, pasta sauce, margarine, instant mashed potatoes, frozen dinners, fast food, soy sauce, and ketchup. Here are some tips: Avoid sugary drinks. One 12-oz soda has about 10 teaspoons of sugar in it, more than the daily recommended limit! Try sparkling water with lemon or a splash of fruit juice. Eat naturally sweet food such as fruit, peppers, or natural peanut butter to satisfy your sweet tooth.

The number of people skiing has increased steadily for the past 100 years

The number of people skiing has increased steadily for the past 100 years. The ever popular sport was started by the English people visiting the Alps. Where people went skiing, resorts started to spring up and businessmen saw the opportunity to make money and started to expand these. These resorts started to bring in many opputunities for the locaal people to work in. Employment in these areas has increased drastically. For example, anyone who decides to visit the resort will have to stay in a hotel. These hotels may be run by an out of country firm but many of the employees would be from the surrounding villages. They would need bar staff, waiters, cleaners, chefs, receptionists, caretakers and managers. The same would go for a restaurant, this would need a manager, waiters, cleaners, and chefs. Many of these new properties that have business lead to multiple job opurtunities. Most of the employees would be local and live here all year. However, although up to 95% of the resorts workforce will be local, the skilled,high paid jobs would be taken by foreigners. Also the all year round businesses would change to become specialised in the few months to maximise the opportunity to make money. A normal sports shop would become specialised in a ski hire shop. The shop would have extra staff which again is an advantage to the local people. Also many people will either bring their children or will be first time skiers and will need an instructor. These people charge à ¯Ã‚ ¿Ã‚ ½100 for a week of training. This means that the ywill again bring in money for the local economy. Many people will leave their children in crà ¯Ã‚ ¿Ã‚ ½ches and these will charge a lot of money again for the local people. However the catch is that these jobs are ENTIRLY dependant on the weather. People cannot ski if there is no snow. So apart from the ski season which at best is four months, the town will be like a small village. In the winter there can be thousands of people there. Some people may get replacement jobs in the summer. A ski instructor may become a water skiing intrsuctor. Or the crà ¯Ã‚ ¿Ã‚ ½che operator may become a teacher. Even so the majority of people will be out of work for eight months. Many may move away but to most people this work for four months make them stay. This halts the process of depopulation in these alpine areas. Depopulation means that people move out of an area because they feel they have no future there. The young people of the ski village will no tmove out because of the money to be made by the tourism in the area. Also if the people did move out ski resorts will not be able to operate as almost everything relys on humans. The will also not move out on the grounds that there are no facilities in the village. This is because many people attract banks, supermarkets, hotels etc. So this means that the people who move for better facilities don't need to. But to many people the idea that there is only work for four months is still not good enough. So for this reason many people do still move away. But if they do stay as in many resorts today, during a busy period they will just add to overcrowding. Because of tourism the area will expience prosperity in their economy. The tourist who come are often on self-catering holidays, this means that will need to buy many items of food, they will spend money in supermarkets and in groceries. They may go to a restaurant, they will spend money there. They will spend money on ski equipment, on ski passes, lift passes and to the hotels. All this will improve the economy. All these jobs mean that people have more money than before. If they have more money their standard of living increases and so they spend more money in the village meaning the economy will prosper. However there are some down sides to this resort. For example, all this development is not natural. It leads to the environment being destroyed. If the environment is destroyed many animals will lose their habitats and will have to go elsewhere or face dying. Trees will also have to be cleared which again means that animals will be forced to leave. Another problem that could be faced by the area is the fact that because o fthe increase in the numbers of people, the number of cars and vehicles in the area also increases. This means that air pollution also gets emmited more. This is ironic as this air pollution leads global warming. This leads to the snow line to get higher. If there is less snow then the resort may be open for less time every year and maybe even be closed. This is a disadvantage for the resort. The other problem is that it can be affected by the present state of the worldwide economy. If people are worried that they may not have enough money, the first thing that they cut is a holiday. As many people who go skiing go as a holiday from abroad. This means that the ywill not go to the resorts. This would be disastrous for the resort as it is the only time of the year they can make money. This means that they would have a bad standard of living for that year. What is more is that the people who do come to the resort will spend less freely than they would normally. This is again due to the fact that the economical situation would make them spend less. A ski resort has many advantages and disadvantages. These are some of the main ones.

The Ethics of International Business Essay Example | Topics and Well Written Essays - 2000 words

The Ethics of International Business - Essay Example According to the research findings, it can, therefore, be said that the relationship of the managers, including the directors, with the stakeholders, is mainly fiduciary. They are after all paid for working for the primary stakeholder, the shareholder to create value and profit for him. It is incidental that for earning this profit, they have to be equally mindful of befitting the secondary stakeholders. Contrary to common belief, there are many stakeholders in the business apart from the shareholder or the stockholder. They are the employees, customers, suppliers, bankers and even the society at large who look for some benefit from the company, and in turn are also its well-wishers. The various audits and financial data only show that these are results of activities that have been checked for correctness but they do not reflect on what level of competence was exercised. The better and more comprehensive method is through Corporate Governance. The company is a legal entity and theref ore has to enter into commercial transactions all the time for carrying on its business activities. These transactions are concluded by the managers on behalf of the company since the legal entity is not a person and needs agents to carry out these duties for it. This ability of the managers to enter into legal contracts and agreements makes them the agent of the company with the liability resting with the company. This situation gives rise to irresponsible behavior on the part of managers who do not carry the burden of any wrongdoing on their part. It is to control this likely misuse of power that Corporate Governance assumes importance.

Fracturing in petroleum engineering Research Paper

Fracturing in petroleum engineering - Research Paper Example Therefore, this research paper addresses hydraulic fracturing with respect to fracturing process, mechanics of fracturing, history of fracturing, types of fracturing fluids and additives and the types of fracturing processes. Hydraulic Fracturing Hydraulic fracturing involves the use of fluid, which is pumped at a determined high pressure into a given section of the wellbore, to enhance oil production. The high pressure liquid finds its way into the rock formation containing oil and creates fractures from the wellbore, which extends into the oil containing rock formation (Yew 1). The established fractures provide flow paths of oil into the wellbore, which is then pumped out of the oil well. Figure 1 shows the hydraulic fracturing process. As shown in figure 1, the pressured fluid pumped through the well bore leads to fracture propagation in the fracturing stages of the process. Figure 1: Hydraulic fracturing process (EPA) History and Examples of Fracturing The use of fracturing in pe troleum engineering to stimulate oil production started in the 1860s, long after oil production was invented. Over time, considerable advancement has been experienced in the field of hydraulic fracturing particularly with respect to the development of hydraulic fluid combinations for maximum efficiency (EPA 1). Other developments include the development of enhanced equipments for injecting fluid and monitoring relevant data especially fluid pressure, fracture depth and fracture width (Yew 6). Hydraulic fracturing has been widely applied in the petroleum industry. For example, statistics show that fracturing is usually conducted to about 90 percent of oil wells in the United States to stimulate oil production (Earthworks). Mechanics and the Process of Hydraulic Fracturing Hydraulic fracturing can be done on oil wells that have been drilled horizontally, vertically or directionally (slanting) (EPA 1). Fluids used in hydraulic fracturing are comprised of water (or methanol, oil or a co mbination of methanol and water in strategic proportions) and chemical additives. Water-based hydraulic fracturing fluids are the most common of the four types of hydraulic fluids. Water content in hydraulic fracturing fluids is highly dependent on the rock formation and the site of fracturing, and it can be up to 99 percent implying that additives can be as little as 1 percent of the fluid content (EPA 1). The quantity of fluid for hydraulic fracturing also depends with site (depth of oil well) and rock formation. Generally, water quantity may vary between 50,000 gallons (189 m3) to about 350,000 gallons (1325 m3) (EPA 1). Silica sand or other small particles (technically known as proppant or propping agents) are added into the hydraulic fracturing fluid, which serves to maintain the open position of the established fractures (propping/supporting). The principle behind hydraulic fracturing is that the hydrostatic pressure of the injected fracturing fluid should exceed the parting p ressure of the target rock formation thereby inducing a network of fractures through the rock (Spellman 11). The fractures arising from the fracturing process are technically referred to as hydraulic induced fractures. Since fracturing operation is usually conducted at enormous depths (oil exploration occurs at large depths), hydraulic

Control Room - a video by Al Jazeera Assignment Example | Topics and Well Written Essays - 500 words

Control Room - a video by Al Jazeera - Assignment Example The channel depicted the massive casualties of innocent people, which was seen as detrimental or somehow derogatory to US operations. Also, the documentary outlined alleged propagandas that America has done to veer people’s attention away from casualties of war and focus on the success of the allied forces in ousting Saddam’s regime. Based on the video documentary, it is primarily aimed to provide the world, especially their Arab fellows, a clear view of the events that have transpired during the war. It presented war-related issues and the sentiments that the Iraqi people had. Though at some point the video delivers point-of-views that might somehow be biased in nature since they are catering their network to their Arab viewers, they remained keen on providing an overview of the war at the perspective of the Iraqi people and the Arabs. Media is truly a powerful tool that can significantly contribute to the overall perspective of an individual on certain issues. For instance, members of the Al Jazeera has shown an event wherein the US allegedly done a publicity stunt to drive away attention from three incidents involving the death of media personnel to US airstrikes. One of the most notable and commendable actions that Al Jazeera took was its courage to go against the tide of all other media coverage during the war. Correspondents have been vigilant in providing its viewers with the actual events that Iraqi people are experiencing; their fear, their pain, and their struggle. However, the video also takes a direct attack on the credibility of the network on issues since some viewers may perceive their actions during the war Iraq are just propaganda to further promote conflicts between the Middle East and the US. In addition, Kirkpatrick’s article on the alleged collusion of the Al Jazeera top news director with a US official to take down two images which an involved a woman and a child who was affected by the on-going war that time. It was clearly conveyed in the video that with any kind of war, there will be deaths of innocent children, men and women; as if there is very little, or nearly absent, consideration on the lives that will be lost, families that will be broken, and communities that will have to start again from scratch after the war has ended.     

NY Safe Act Potential Impacts on Juvenile Offenders and Community Essay

NY Safe Act Potential Impacts on Juvenile Offenders and Community - Essay Example The Juvenile Justice System (JJS) refers to a group of juvenile courts in any given country. The juvenile court which is also referred to as the offender’s courts is mandated with the passing of judgments for any crime which young children commit. Many JJS especially in the New York are meant for the rehabilitation of the young children instead of imprisonment http://open.nysenate.gov/legislation/bill/s2230-2013. Though the JJS provides a place for the juveniles to correct their behaviors, through rehabilitation, the Act has a lot of effects on juvenile offenders, their families, community safety and the mental health practice. One of the impacts of the law or Act on juvenile offenders is that they would get to know their mistakes and thereby correct them. By punishing the young ones, they would be affected mentally, but as per the court stipulations, they should first be given advice as to why they are in court and how their behavior should be corrected (shoemaker 2009). The families of the juveniles would also be affected by the law. One of the effects to the families includes emotional stress, especially to the parents. On the other hand, the families can also appreciate for the corrective behavior that their children would adopt. Though many parents of the juvenile offenders would not appreciate the corrective behavior offered to their children, some would appreciate since their lifetime behavior would also change (Wheeler 1978). On the impact on the community, there would be improvement on the safety of the community at large since even the children form part of the community. There would also be a reduction of the number of crimes and this would also serve as a lesson to the other young children in the community. The passing of laws against the juvenile offenders would also have some effects on the mental health practice in the New York. For one, the mental health practice has

Strategies for Management Improvement Essay Example | Topics and Well Written Essays - 3500 words

Strategies for Management Improvement - Essay Example These are what to sell and whom to sell (Stone, 2001). It is entirely related to the markets and products. In this matrix, there are four quadrants that represent four courses of action that could be considered while making any strategic decisions regarding the growth of the organization. The matrix is shown below. In this growth strategy, existing products of the organization are sold in the existing markets. There are four major objectives that could be achieved by adopting market penetration strategy. These are increasing or maintaining the current market share of the existing products, securing dominance in the growth markets, restructuring a grown-up market and finally increasing the usage of the existing products by the existing customers. Increasing or maintaining the current market share of the existing products: this objective could be attained by adopting more competitive strategies regarding pricing, advertising. Putting in more resources into personal selling might also be helpful in achieving this objective. Restructuring a grown-up market: Any mature or grown up market could be restructured by driving out the competitors. Innovative pricing strategies need to be designed so that the competitors consider the market as an unattractive one. Again extensive promotional campaign would work as a catalyst in the process. In the ‘market development’ growth strategy existing products are sold into new markets. Implementation of this strategy would include selling products in new geographical locations, establishing or finding new distribution channels and designing innovative pricing policies. One of the most effective growth strategies is introducing new products in the existing markets where the organization already has its presence. New competencies are required to develop in order to adopt this strategy. Organizations can either develop entirely new products or simply modify the existing products in order to get the attention of the customers in the existing markets.

Net Neutrality Essay Example | Topics and Well Written Essays - 500 words

Net Neutrality - Essay Example The ISPs do claim a right for creating a tiered Internet, which the opponents claim is discrimination and impacts negatively on the neutrality of the Internet. By creating a tiered Internet service all that the ISPs are doing is creating a differential pricing dependant on what flows through their pipes. This is akin to the US Postage Service, where there is a difference in cost of mailing a postcard and sending a heavy parcel like a bicycle. If such a tiered service was not there the cost of mailing a postcard would go up several times making it unaffordable for many. The principles of a free market call for allowing business enterprises to charge varying prices for different services, and demanding that there be legislation to make restrict this is unfair to the business enterprises involved in providing Internet Services. Demands for net neutrality are therefore unfair to the ISPs and for many of the ordinary users of the Internet. Innovation within the Internet is a requirement for its development, of not the Internet, is likely to stagnate at current levels. ISPs innovate to develop the Internet so that they can remain competitive. It is through these innovations that new features and services become available to the Internet users. Net neutrality hinders such innovation and new features, which come at a cost to the ISPs. So calling for net neutrality is tantamount to calling for the stagnation of the Internet. Preserving net neutrality lacks credibility for it will lead to extra costs for the ordinary users.

Renal transplants Research Paper Example | Topics and Well Written Essays - 750 words

Renal transplants - Research Paper Example During this time, approximately one third of potential living donors are unable to donate to their potential recipients due to ABO or antigen incompatibility. Kidney paired donation (KPD) and kidney list donation (KLD) were the alternative options for candidates with incompatible donor (McKay, 2010, 103). The first KPD transplant was performed on South Korea in 1991. The United States performed its first KPD transplant in 2000 in Rhode Island Hospital while the first KLD occurred in England in 2001 (McKay, 2010, 104). The kidney is the most commonly transplanted organ in the world with more than 160,000 persons in the United States living with a transplanted kidney by the end of 2008 (Shoskes, 2011, 154). But despite this number, persons needing kidney transplantation still increases and a relative scarcity in terms of resource arise. A complete array of information about kidney transplantation was included in the databases of U.S. Renal Database System (USRDS), Scientific Registry o f Renal Transplants Recipients (SRTR), United Network for Organ Sharing (UNOS), and Collaborative Transplant Study (Shoskes, 2011, 154). Procedures Before a patient undergo kidney transplantation, a series of laboratory tests and procedures are needed to perform and complete. Matching is the key tool is successful transplantation. The donor’s organ should match the recipient’s body in terms of ABO and antigen incompatibility to avoid risks of rejection. The patient with end-stage renal disease may choose from treatments such as peritoneal dialysis, hemodialysis, or transplantation. Transplantation is done if the patient wants the treatment or if according to disease severity, requires the transplantation procedure. The surgical team involves the pre-emptive living donor (LD) transplantation to minimize pre-operation transplant list and maximize operative choices. The LD transplantation decreases the risk of acute tubular necrosis due to ischemia, increases potential fo r matching, and offers opportunity to initiate and optimize immunosuppressive therapy, thereby reducing acute rejection episodes (McKay, 2010, 17). Background regarding the quality of the donor’s organ was predetermined and positive outcome was expected. Then, the transplant team prepares the patient for the procedure. However, if the patient has superior vena cava syndrome due to an AV graft in the previous hemodialysis, a different procedure is done by the nephrologists and cardiologists. The organ transplantation is divided into five separate procedures (McKay, 2010, 18) and discussed as follows: 1) Preparation – the surgeon discuss to the patient the surgical procedure. General anesthesia is introduced after and intraoperative measures are implemented. 2) Exposure – after prepping and draping, incision is made in the right or left lower quadrant. 3) Vascular Anastomoses – venous anastomoses first and arterial anastomoses must be last to avoid complica tions of bleeding and thrombosis. The kidney is chilled and topical iced is used liberally. Clamp is placed in the renal vein. 4) Ureteral anastomoses – is the preferred method to establish urologic continuity 5) Closing – wound/skin closure and measures to prevent complications. After completion of all the procedures in kidney transplantation, the patient is placed in the recovery area and post-operative interventions are applied. Health providers monitor for rejection signs post-operative

The Three Important Benefits That IBM Will Receive From Outsourcing Essay

The Three Important Benefits That IBM Will Receive From Outsourcing Their HR Functions To Fidelity - Essay Example This is called outsourcing. Many large companies now outsource jobs such as call center services, e-mail services, and payroll. These jobs are handled by separate companies that specialize in each of the services by means of contracts. Today more and more companies are resorting to outsourcing. This is attributed mainly to the increased efficiency and cost cuts. Earlier small companies and companies which were newly established would resort to outsourcing, but today even giants like IBM are making use of it. In July 2002, a deal was negotiated between International Business Machines Corp. and Fidelity's Employer Service Co. According to the deal, Fidelity's Employer Services Co. unit was to take over key human-resources functions for 260,000 IBM employees and retirees. Fidelity was to hire 450 of IBM's 1,200 U.S. human-resources employees. Among the jobs Fidelity would handle for IBM were health-plan administration, career services and pension administration. IBM would continue to provide other functions in house, including payroll (Johannes L. and Armstrong D. 2002). According to the article "The benefits of outsourcing for small businesses (n. d)", "Though reducing expenditure is not the prime reason for outsourcing, it is certainly a major factor. Outsourcing converts fixed costs into variable costs and releases capital for investment elsewhere in the business. Outsourcing makes the firm more attractive to investors, since of the ability to pump more capital directly into revenue-producing activities." Though true for small companies, it applies equally well for giants like IBM. In the case of IBM this is exemplified by the fact that the human resource functions of 260,000 workers and retirees have been taken over by Fidelity which has specialization in the field. If the former were to do the same job, it would certainly prove more costly than that of the latter. The funds saved, if invested elsewhere in the company would improve revenues. Also this would make IBM more attractive to investors, as the saved capital can be invested in the revenue generating areas and core fields. Increase in efficiency: As IBM is a research oriented company specializing in manufacturing computers, it has a high research and development expenditure. Fidelity's cost structure and economy of scale can give IBM Corp an important and strategic advantage. This would help in decreasing the labor costs. The success of IBM depends upon short term projects that it undertakes. Hiring and training workers for short-term projects can be very expensive and short term employees don't always live up to the desired expectations (The benefits of outsourcing for small businesses). IBM's deal with fidelity will play a leading role in improving overall efficiency by decreasing labor costs. About 450 workers in IBM Corp.'s Raleigh employee service center will transfer to Fidelity Investments beginning Aug. 1, as part of an agreement that allows Boston-based Fidelity to administer IBM's pension plan, the 12th largest in the United States (450 IBM employees to transfer to Fidelity. July 2002). The transfer of 450 out of 12 00 members in the human resource division would certainly decrease the labor costs by more than one third in that particular division. Also as the number of employees is decreased, it increases the scope for other employees to make their jobs secure. More security means more productivity which in turn means more efficiency. Focus on core businesses. IBM, too, like any other company has

Newest Aircraft on Air Essay Example for Free

Newest Aircraft on Air Essay The F-35 varieties are designed to replace the older versions of aircrafts because these aircrafts that are used by the Armed Forces are susceptible to errors and risks, which are the common grounds for aircraft accidents. This research paper discusses the new technology behind the making of F-35 Lightning which has three (3) variants: (1) F-35A CTOL, (2) F-35B STOVL, and (3) F-35C CV. F-35 Lightning Design and Combat The F-35 Lightning is designed to take over the U.S. Air Force’s A-10 and F-16, the U. S. Navy’s F/A – 18, U.S. Marine Corps’ AV-8B Harriers and F/A -18, and U.K. Harrier GR.7 and Sea Harriers. The F-35 is also made for unusual air-to-air combat performance, and uses advance stealth to avoid being detected as it employs a powerful sensor in locating, targeting, and destroying multiple enemy fighter aircrafts. With the supersonic speed, F-35 has the most powerful engine among fighter planes and is capable of carrying weapons internally and avoiding aerodynamic drag of external stores to increase its agility reaching 9 g’s. In stealth mode, it can carry internal weapons load which includes two (2) 2,000 pound joint direct attack munitions (JDAMS) and two (2) advanced medium range air-to-air missiles (AMRAAM). The F-35 can be utilized in either close-in or long-range air-to-air combat. Variants F-35A Lightning Overview The F-35A (see Figure 1[i]) fits for the U.S. Air Force for the conventional takeoff and landing (CTOL) which uses a conventional runway for takeoff and landing. The internal capacity of fuel is around nine (9) tons which sustains an unrefueled range of at least 1,200 miles without external tanks. It also carries a 25 mm GAU-22/A cannon internally. The standard weapons load is two (2) AIM-120C air-to-air missiles and two (2) 2,000-pound GBU-31 JDAM guided weapons. In order to attain all air-to-ground and air-to-air ordnance, the internal weapons bay can be reconfigured. When the stealth is no longer needed in a mission, the F-35A pylons are brought with ordnance that gives the aircraft a weapons payload of at least 18,000 pounds. (Lockheed Martin) Features and Comparisons with Older Models The F-35A is able to exceed the performance of the F-16 due to several reasons: (1) stealth, (2) expanded range on internal fuel capacity, and (3) superior avionics. Also other features and abilities like the survival, effectiveness and support are dramatically improved in this aircraft. In comparison with the F-16, F-35A also includes an interior gun and a refueling container. The maneuver characteristics are the same with the F-16 with comparable instant and sustained â€Å"High-G† performance. On the other hand, unlike the F-16, the aircraft is stealthy and has the capability of first-look, first shot. The information gathered from sensors is put together or sorted out before being placed to the helmet-mounted or head-down displays. The aircraft also has advanced electronically scanned array radar. To add more, it also contains internal laser designator and infrared sensors. The range and payload for F-35A as mentioned above is highly greater than the older aircraft models. Design and Flight Tests The release of F-35A can surely improve the ability of the pilot in assisting in combat campaigns at longer ranges because of the large fuel capacity and the engine design which is single. As mentioned above the F-35A can carry more than 18,000 pounds of internal fuel and also can carry external fuel as well. This addresses the concern of increased combat scope and longer period spent on the base which is the experience on other aircrafts. For the flight tests, the Joint Strike Fighter X-35 demonstrator aircraft set a number of flight standards. The X-35A conventional take off and landing had a recorded 27 flights (highest), 27.4 flight hours (highest), 6 pilot checkouts (most), two cancelled flights (fewest) and a 6 1/3 flights per week(highest) in the first month of aircraft testing. The recording was established from October 2000 until August 2001. The first F-35 demonstrator aircraft left the Air Force’s runway in Plant 42, Palmdale, California on October 24, 2000 and reached Edward Air Force Base, California to begin the flight test program. On November 7, 2000, the F-35A was fueled from a KC-135 tanker for the first time and was able to record its longest flight of 2 hours and 50 minutes. It completed its test flight on November 22 2000 after finishing 27 flights in 30 days and achieving the first JSF supersonic flight the day before. It was brought back to Palmdale to be converted to STOVL F-35B. (Global Security) The U.S. Air Force is set to receive its first F-35 aircraft by 2008; however the initial operational capability (OIC) for the service will be available in 2011. F-35B Lightning Overview The F-35B (see Figure 2[ii]) is designed for the U.S. Marine Corps and the U.K. Royal Air Force and Royal Navy and is regarded as the world’s first short takeoff/vertical landing (STOVL) aircraft which has the ability to operate regularly at supersonic needs. This feature makes F-35B to operate from small ships, roads, and austere bases. It deploys near front-line combat zones which shrinks the distance greatly from the base to the target which also increases sortie rates while removing the need for logistics support. The internal fuel capacity of F-35B is seven (7) tons that provides unrefueled range of 900 miles without the use of external tanks. Its standard weapons load is two (2) AIM-120C air-to-air missiles and two (2) 1,000-pound GBU-32 JDAM guided weapons. It can also load six GBU-38 small-diameter bombs, and also huge choices of air-to-ground missiles, dispensers, and guided weapons. Same as F-35A, the internal weapons bay is reconfigurable for air-to-ground or air-to-air ordnance or a blend of both. If stealth is not required, F-35B external pylons are loaded with ordnance which gives the aircraft a weapons payload of more than 15,000 pounds. It is also recognized as the first STOVL stealth fighter. (Lockheed Martin) Comparison with other models The F-35B is said to replace the old AV-8B Harrier STOVL attack jets because of their support difficulties. According to Charles Davis (2006), the F-35B has a 25mm â€Å"missionized† gun which is put in the belly of the said aircraft and has a combat scope of at least 450NM. This combat radius is twice the specs of other STOVL fighters. The lift fan which is shaft-driven, including the vectoring rear exhaust nozzles provides power and abilities to the aircraft to (1) take-off in little distances, (2) increase speed reaching supersonic speeds in level flight, and (3) land vertically due to the lift-fan system. â€Å"The F-35Bs total vertical lifting thrust is about 39,700 pounds (the aircraft weighs about 30,000 pounds) which is more than 14,000 pounds greater than the engine alone would produce without the lift fan. The F-35B will be the worlds first operational supersonic STOVL aircraft today†. (Davis, 2006) This kind of aircraft that is going to be used by the U.S. Marines and the UK Royal Air Force is unique from the other kinds of aircraft because of its short takeoff/vertical landing capability. As mentioned in the first requirement for achieving this capability, the airplane must have more vertical lift than weight. The first requirement is regarded to have difficulties in achieving it. The airplane must have a smaller weight and have an increased thrust-to-weight ratio. The second requirement is fine controllability in every axis of the airplane at zero airspeed. The transition between up-and-away flight and hover must be carefully taken into consideration. Other critical factor that can affect the aircraft’s overall performance is â€Å"the airplanes hover footprint, which is the propulsion systems impact on the ground surface or carrier deck. The method in which thrust is developed is the key in producing a benign footprint†. (Global Security) Factors that must be considered are noise levels and heat effects on the deck and on the aircraft itself. Aside from the shaft-driven lift fan the aircraft has slightly shorter scope because the space utilized by the fan system for some of the fuel in the Air Force variant. Still, the aircraft has more than twice the range of an AV-8B on internal fuel and can carry a bigger payload. Pointing engine thrust directly down produces a tremendous amount of reflected energy, which results in all kinds of effects that make the life of the structures lessen. Acoustic considerations are material considerations because they affect material choices for the underside of the airplane as well as for structures and payloads attached to the airplane. The aircraft shares all of the electronic gear of the Air Force variant. Cockpit layout is also virtually indistinguishable, with the exception of a thrust-vector lever for the aerial mode. â€Å"The JSF X-35 demonstrator aircraft established a number of flight test standards from October 2000 through August 2001. The X-35B short takeoff vertical landing is the first and only aircraft in history to achieve a short-takeoff, level supersonic dash and vertical landing in a single flight. It is also first aircraft to incorporate and fly a shaft-driven lift-fan propulsion system. For the record, it has tallied 17 vertical takeoffs, 14 short takeoffs, 27 vertical landings, and five supersonic flights†. (Global Security) â€Å"The Department of Defense working groups and conferences started to question the community acceptance strategies for some new weapons systems. In particular, the Joint Strike Fighter (JSF) may face a variety of challenges in some possible beddown locations†. (Global Security) The aircraft generates an extraordinary amount of thrust from its single engine, which according to preliminary analyses, contributes to noise and air pollution. Investigations in San Diego, California revealed air quality limitations that may rule out unrestricted operation of the STOVL (Short Takeoff, Vertical Landing) version of the aircraft. And these will be acquired by the USMC. The highest thrust settings for the aircrafts F-119 engine will occur during transition to and from vertical flight. Noise and pollutant emissions, especially of Nitrogen oxides may exceed those encountered in any equivalent engine. On February 2004, there were some setbacks that occurred. As detailed design progressed, the weight estimates from early in the design phase were found to be unrealistic. The program leadership was soon faced with the harsh reality that the short takeoff/vertical landing (STOVL) variant would need to lose as much as 3,000 pounds to meet performance requirements. This was an unexpected negative development, and according to a few, the said fix will be either impossible or too costly and time-consuming. For the solution, the JSF constituted a re-plan phase in order to assess a number of issues pertaining to the aircraft design. (Davis, 2006) The Special Weapons and Tactics (SWAT) discovered a way of designing the STOVL F-35 that will meet or exceed its performance requirements. The team not only removed more than 3,000 pounds of unwanted estimated weight, but also improved the structure, improved the load paths and brought increased efficiencies to the overall aircraft. â€Å"The internal bays of the F-35B STOVL variant were redesigned in late 2004 and are now shorter and reduced in width, compared to the F-35A CTOL model†. (Lockheed Martin) â€Å"This was done to address the weight of the F-35B to meet other more important performance goals. As a result, the F-35B is no longer compatible with JSOW and 2,000-lb JDAM weapons. The largest weapon this F-35 variant can carry internally, as mentioned above, is the GBU-32 1,000-lb version of JDAM†. (Lockheed Martin)

Leading And Managing A Change In Clinical Practice Nursing Essay

Leading And Managing A Change In Clinical Practice Nursing Essay I had seen many patients complains of complex wounds that need long time to cure. Complex wounds are considered as a real challenge to the health care providers especially when it is accompanied with factors that can play role in impaired and complicate wound healing such as Surgery, infection, the presence of diabetes, Trauma, Radiation, Autoimmune diseases and arteriosclerosis. As stated by Ferreira. M, 2006: The most commonly seen complex wounds that require special care and attention are Wounds in the lower extremity of diabetic patients, Pressure ulcers, Chronic venous ulcers, Wounds following extensive necrotic processes caused by infections and Chronic wounds related to vasculitis and immunosuppressive therapy that have not healed using simple care. There is no specialized and responsible team who can determine the best type of management for the patients with complex wounds. The health care provider in the hospital is providing the same care and management to the patients who complaining of simple or complex wounds. They need to know that There are striking differences between simple wounds, for example surgical wounds or skin scratches, and those chronic wounds that do not heal primarily and demand specialized care, mostly in hospitals (Ferreira. M, 2006) .This will harm the patient (physically and emotionally), decrease the quality of care that provides to the patients, delay wound healing and increase the period of hospitalization. The care provided for patients with wounds can be described in one single word which its DRESSING. While the treatment of the complex wound is much complicated. Determining that the majority of these complex wounds should be considered surgical cases and not just cases for dressings as stated by Ferreira. M. 2006. The treatment of complex wounds should be by using surgical procedures instead of the clinical measures. In addition to debridements, skin grafting, and flap coverage. Health care providers (doctors, nurses, etc) need to increase their awareness about the important of the presence of wound management team in each hospital to decide the best type of management, decrease the complexity of the treatment and choose the best surgical approaches that will increase the quality of life to the patient. Step 2 A complicated wound needs more than just a bandage to recover and heal. It needs special attention; compassion of a wound care team who are specializes in non-healing and slow to heal wounds. As stated by Tjandra. J, 2001Wound healing is the replacement of destroyed tissue by living tissue, and is fundamental to survival. My vision is to form a team of professionals who work together to assess patients wound and provide input regarding their treatment. This team consists of physicians, physical therapists, dietitians and nurses wound therapy nurses and nurses specialized in complex wounds. These specialized wound nurses may visit patients in their home in order to provide an effective plan to heal their wounds. They have to work on providing appropriate wound care to the patients that will help the complex wound to heal faster. As well as they should know that Wound healing may be impaired by general factors such as malnutrition, corticosteroids, diabetes mellitus and anaemia, which affect the patient as a whole. And local factors such as infection, ischaemia and hematoma which affect the site of the wound (Tjandra. J, 2001). In addition to cleansing, control bacterial growth and prevent infection. This team will also provides education to patients and their families to help prevent any future complications, increase there awareness regard complex wounds and their demands to heal, encourage them to collaborate with the team and participate in the treatment. This change will enhance the quality of care patients received; improve the quality of life, decrease the period of hospitalization and promote the process of healing. It is important that all practitioners are aware of the pathophysiology and aetiology of pressure ulcers and mechanisms to prevent pressure ulcer development (Ousey, K, 2005) because Patients with complex wounds need to spend long period in the hospital so they will be at high risk of develop bed sore. Team members should coordinate program to prevent pressure ulcer that will protect the patient from getting this series skin problem. This change will build up a very strong team who are able to put the patient on the right way of cure and make them able to treat the complex wounds in time less than the expected. It is a real chance for all the health care provider specially nurses toward increasing their knowledge and improving there skills. Wound care team consider as a good step towards improving the health care services in the hospital. Step 3 4 Leadership is a very important concept in nursing professional that helps to develop the skills of nurses and the other health care professionals. I will be able to achieve my vision by using one of the most important models in leaderships and management. It is John Adairs Leadership model. Adair has developed what he calls a functional approach to leadership based on three overlapping circles of needs which are achieving the task, managing the team or group and managing individuals (Cipd 2010). By adopting this model of leadership, my responsibilities as a leader to achieve the task are as follows: sharing my vision, goals, and objectives with the team members. Then, create an action plan to achieve the task, considering timescales and strategies. It is important to share my action plan with the members and ask them for feedback or suggestions. After that I will distribute responsibilities by agreement and delegation, monitor and maintain overall performance against plan and report the progress toward the team aim continuously. Finally review, reassess, adjust plan, methods as necessary. In addition to that I will encourage and motivate the members to be involved in making decisions and giving suggestions, to make the task a success and meet our goals. The leader should try to resolve any groups conflicts and look for ways to develop a cooperative team working. However, to develop each nurse and improve her skills, we will recognize the team member as individuals, and get to know their strengths and needs, we have to help them and encourage them to challenge the complex cases of wounds. It is very important to give awards and recognitions to the individuals hard efforts and work. Therefore, to achieve my vision and reveal the benefits of this change I will apply Lewins three- stage model of change. It is a holistic model that helps people to think about the change and gradually adopt it as pointed out by martin (2003). Lewin proposed 3 stages for any changes to occur, including: the unfreezing stage is when people start to believe that there is a need for change, the moving stage, when it is possible to make changes, and the refreezing stage is when the change is strengthened and becomes the new normal state (martin 2003). In the unfreezing stage team members must realize that they will be able to treat any type of complex wounds and promote wound healing if they work on improve their knowledge and skills. They will see the importance of act as one collaborative group to enhance the quality of care and promote wound healing. As stated by Reinelt (2010) Evidence-based practice (EBP) is commonly used to inform practice decisions in the fields of medicine, nursing, social work, child welfare, and criminal justice. So it is important to provide the team with some evidence based research that will guide decision-making about what treatments and protocols to use with individual patients, and offenders to ensure the highest possible accountability for producing good results. Reinelt (2010). In addition to that, I will invite nurses and doctors from other countries that are already implemented this idea in their hospitals and ask them to give presentation to our health care providers about their experience and discuses how this change can improve the quality of care and increase the benefits to the patients. Throughout this stage, I will be expecting initial resistance to the change by some people but I will listen carefully to their opinions and issues, I will try to convince them of the important and the benefits of implementing this change. I will also encourage them to give suggestions that would help in achieving my vision. In the moving stage, we will see the possibility of forming complex wound team in the hospital and improve members skills and knowledge. In this stage I will arrange for different teaching sessions and workshops that will help in increase members knowing, improve their therapeutic and communication skills, and enhance their confidence. One of the most important nursing leadership qualities is supporting your team, If the members of the team wish to develop new skills, or apply their theoretical knowledge in a practical environment, it is important that the leader provide a supportive environment for them to try out these skills. This will provide them with the true method of learning, and develop their skills in a competent manner (Lalwani, P. 2010). In addition, there will be a team supervisor who will distribute and organize the work between the members and promote team collaboration. In the refreezing stage, the change is carried out and implemented, the team is working together to treat and promote healing of any difficult wounds. Leader should keep in mind that not every member can deal with stress and other such aspects of the profession very well. So, as a leader, I will need to support them, and understand and help them in a way that proves useful for them (Lalwani, P. 2010). The Leader is responsible of solving problems, encourage and motivate the members and introduce feedbacks, as stated by Lalwani, P. 2010, Feedback can, and should also be positive, as this will further encourage your team members to perform better and keep introducing innovative yet efficient ways of becoming independent. Therefore, there will be monitoring committee to observe team achievements, evaluate their understanding, knowledge and skills and recognize the benefits of this change for patients, families, and the healthcare providers. The findings will determine if we will carry o n this change, stop it or create another action plan to overcome the difficulties and improve the outcomes. Step5 As stated by Lalwani, P. 2010, my goal is ensure the betterment of the organization I am work for, by improving the quality of patient care, which I can do with the application of various creative leadership qualities and management strategies, and the different leadership styles in nursing. My action plan included many steps and events which will aid to achieve my vision and create wound management team consist of physicians and nurses specialize in the complex wounds. This will help to achieve my goals such as enhance the quality of care patients received, improve patients quality of life, and promote healing of the difficult wounds. In addition to improve health care providers knowledge and skills regarding the difficult wounds and the most important thing is create nurses specialize in wound therapy and make them able to treat any complicated wounds. So I think my action plan is fit well with my previous explanation and rational for change. Conclusion By the end of this assignment I discover that there are at least 8 qualities that successful leaders have: Responsibility, Integrity, Decision takers, Deal with facts, Vision and inspiration, Optimism, Resilient, and Excellence (Brodie, D. 2008). The Successful leaders are not just working to put themselves in good senior position but to use their skills, knowledge and all the leadership qualities for the growth of the organization that they are working for, provide high quality of care to the patients that will lead to patient satisfaction and play role in the progress of their health and well being. I can understand now that the leaders are those who are willing to follow. They must be perfect in whatever they do, because by doing their best; they will discover that only the best is expected from their team members. http://www.scielo.br/scielo.php?pid=S1807-59322006000600014script=sci_arttext Tjandra, J. Clunie, G. Thomas, R (2001). Text Book of Surgery/ Wound Healing and Wound Management. USA, Canada, Australia. 2nd ed., Pp 20, 23, 24, 25. Ousey. K, (2005) Pressure Area Care, UK.1st ed., Pp 13 http://www.cipd.co.uk/subjects/maneco/leadership/leadshipovw.htm?IsSrchRes=1 Martin, V. 2003 Leading change in health and social care, 1st ed., Routledge: London and New York, Pp. 104-06. http://leadershiplearning.org/blog/claire-reinelt/2010-06-29/use-evidence-based-practice-field-leadership-development http://www.buzzle.com/articles/nursing-leadership-qualities.html (Lalwani, P. 2010) http://ezinearticles.com/?The-8-Qualities-of-Successful-Leadersid=760414

Mental Health Well-being of Dementia Carers

Mental Health Well-being of Dementia Carers Introduction Research is undertaken and applied across many different professions and disciplines, as it offers a basis for increasing knowledge, informed decision making and action (Minichiello, Sullivan, Greenwood Axford, 2004; DePoy Gitlin, 2011). Within the nursing profession research is the link between theory and practice and has influenced many changes to the way that nurses practice (Schneider, Elliot, LoBiondo-Wood Harber, 2003). Research has brought about improvements in the delivery of care which in turn contributes to improved patient outcomes (Loiselle, Profetto-McGrath, Poilt, Beck, 2007). Nursing research has made available the best evidence to support and underpin nursing practice as it is currently: this is essential to the achievement of optimum biopsychosocial results for the patient, their family members and their wider community. Furthermore research guides legislation and regulations at a government organisation level (LoBiondo-Wood Harber, 2010; DePoy Gitlin, 2011; Da vies Logan, 2012). Health research topic This assignment will explore how research is designed, conducted and applied to investigate and inform the improvement of mental health wellbeing of those who care for people with dementia. In an international study on the global prevalence of dementia published in 2006, experts estimated that there were 24.3 million people with dementia, with 4.6 million new cases of dementia every year, one new case every 7 seconds (Ferri, Prince, Brayne, Brodaty, Fratiglioni, Ganguli Scazufca, 2006). It is estimated that there are 50,000 New Zealanders currently diagnosed with dementia and by 2026 it is estimated to be close to 78,000 (Ministry of Health, 2013). The prevalence of this cognitive disease necessitates research to better understand the effects and implications dementia has on people and society and how society can be better equipped to face the psychosocial challenges dementia presents for those in caregiver roles. Research Paradigms Depoy and Gitlin (2011) define research as â€Å"multiple, systematic strategies to generate knowledge about human behaviour, human experience, and human environments in which the thinking and action processes of the research are clearly specified so that they are logical, understandable, confirmable, and useful† (Depoy Gitlin, 2011, pg. 6). There are two major research paradigms that underpin these systematic strategies, determining how a researcher will ‘think and act’. They are positivist and the naturalistic. A positivist paradigm is most closely allied with quantitative research and naturalistic paradigm is most often associated with qualitative research (Christensen Johnson, 2012, Loiselle et al. 2011). Each paradigm or approach is a perspective on research based on a set of shared assumptions, concepts, values, and practices (Christensen and Johnson, 2012). These two paradigms have two very distinct ontological, epistemological and methodological foundati ons. Quantitative research views the nature of the knowable and the nature of reality as being objective, material and structural. This worldview or perspective is that there is a reality ‘out there’ that is separable and independent from individual. That this reality can be verified and discovered through the scientific method is the fundamental assumption of positivism or the positivist paradigm (DePoy Gitlin, 2011; Loiselle et al. 2011; Christensen Johnson, 2012). The positivist or experimental-type perspective employed by quantitative research primarily follows the confirmatory scientific method because it focuses on hypothesis testing and theory testing (Christensen Johnson, 2012). Logical positivists believe that there is a single reality that can be discovered by reducing it into parts, and discovering the relationships among them. In other words, the logical, structural principles that guide some component of reality can be known. This concept is known as reductionism (DePoy Gitlin, 2011). Quantitative researchers typically use deductive reasoning to identify a single reality and generate predictions or hypotheses. They then use a systematic approach, progressing logically through a series of steps, according to a prespecified plan. The researchers use various â€Å"controls† to minimise biases and maximise precision and validity (DePoy Gitlin, 2011; Loiselle et al. 2011). Empirical evidence is rigorously and systematically gathered (directly or indirectly through the senses rather than personal hunches) using tested means. Quantitative information, being numeric information, is gathered then subsequently analyzed and measured through statistical procedures to deduce if a hypothesis is true or false (Loiselle et al, 2011). The hypothesis is confirmed or rejected on the basis of these empirical results. Qualitative research, on the other hand, take the view that as nature of the knowable and reality are mentally constructed by individual, they are multiple, subjective and personal. This worldview claims that reality is not a fixed entity but rather a construction of individuals participating in the research. That reality exists within a context, and many constructions are possible is the fundamental assumption of a naturalistic paradigm (Loiselle et al. 2011; Christensen and Johnson, 2012). Naturalistic inquiry theorists believe that ideas and individual interpretations are the lenses through which each individual knows and comes to understand and define the world. â€Å"Knowledge is based on how the individual perceives their experiences and how he or she understands his or her world† (Depoy Gitlin, p. 26). Naturalistic methods of enquiry attempt to capture these dynamic, holistic and individual aspects of phenomena in their entirety, within the context of those who are experiencing them. Therefore, naturalistic investigators emphasize understanding the human experience as it is lived, usually through the collection and analysis of qualitative materials that are narrative and subjective (Loiselle et al. 2011). Qualitative methods differ from that of quantitative in that procedures are flexible and can be modified to capitalize on findings that emerge during the course of study. Qualitative studies take place locally, in a natural setting, in the field, frequently over extended periods of time. Data collection and data analysis typically progress simultaneously . Consequently, naturalistic studies yield rich, in-depth information that can potentially clarify the multiple dimensions of a complicated phenomenon (Loiselle et al. 2011).t The scope of this assignment is to further examine and analyse quantitative research design and methodology and how it relates to the research of dementia†¦ Quantitative Experimental Design In experimental-type research, DePoy and Gitlin (p. 84) describe design as the plan or blueprint that specifies the procedures used to obtain empirical evidence to determine the relationship among variables of the study. In other words, the design is structured in such a way as to enable an examination of a hypothesized relationship among variables. Generally in quantitative research, hypotheses are constructed from general principles prior to data collection and then tested during the study. Experimental design is therefore well suited to answering questions about cause and effect or causation (Minichiello et al, 2004). The specific procedures actioned to obtain empirical evidence depend on the study and the design method used, but generally quantitative experimental designs involve sampling, data collection, data analysis and reporting. Investigators employ sampling techniques to select a subgroup that can accurately represent a population, defined as a group of persons, elements or both that share a set of common characteristics as predefined by the investigator. The intent is to be able to draw accurate conclusions about the population by studying a smaller group of elements (sample) (Minichiello et al, 2004, DePoy Gitlin, 2011). In quantitative research the collecting of data, quantifying information or measurement is a primary concern. Therefore the researcher must ensure the data instrument used is reliable and valid (DePoy Gitlin, 2011). Reliability refers to the degree of consistency with which an instrument measures an attribute and validity addresses the critical issue of the relationshi p between a concept and its measurement. It asks if whether what is being measured is a reflection of the underlying concept (Minichiello et al, 2004, DePoy Gitlin, 2011). The instrument can be one that the researcher designed themself, modified from another study, or an intact instrument that has been used by another researcher (Creswell, 1994). When experimental-type research is conducted, the researcher’s first preference is the selection of instruments that have demonstrated reliability and validity for the specific populations or phenomena the investigator wants to study. As is the case in the quantitative research articles explored later in this assignment. Statistical analysis is an important action process in experimental-type research that occurs at the conclusion of data collection and data preparation. It is at this juncture that data become meaningful, and lead to knowledge building that is descriptive, inferential or associational. From this analysis investigato rs can interpret and summarize data, generalise findings to the population from which the sample is drawn, and make causal statements and predictions (DePoy Gitlin, 2011). That part done. now how to tie this one to the next one below. True experimental design has three distinguishing properties namely; a randomised population sample, an intervention otherwise known as a manipulation and a control group for comparison (Nieswiadomy, 2008; Davis Logan, 2012). By randomly assigning subjects to an experimental group and a control group, the investigator attempts to develop equivalence, or eliminate subject bias, caused by inherent differences that may occur in the two groups (DePoy Gitlin, 2011). Investigators then manipulate an independent variable (IV) so that the effect of its presence, absence, or degree on the dependent variable (DV) can be observed. Manipulation is the action process of manoeuvring the independent variable for example the (IV) could be medication, a teaching plan or treatment etc. (Minichiello et al. 2004; LoBiondo-Wood Harber, 2010; DePoy Gitlin, 2011). The dependent variable is the variable that has changed due to the result of the manipulation e.g. the measured end result (Dempsey Dempsey , 2000; Minichiello et al, 2004). This enables researchers to study ‘cause and effect’ relationships (LoBiondo-Wood Harber, 2010; Hedges Williams, 2014). Within the health arena the ‘causes’ are often the interventions or treatments and the ‘effects’ are the final outcomes (Minichiello et al, 2004; Moule Hek, 2011). The control group is the comparison group that receives the usual treatment or care, compared to the experimental one under scrutiny. This ‘true’ experimental design is referred to as a randomized controlled trial (RCT) (LoBiondo-Wood Harber, 2010). RCT’s are considered the ‘superior’ design when investigating cause and effect relationships (LoBiondo-Wood Harber, 2010; Loiselle et al. 2011). This control of variance and over extraneous influences inherent in experimental design allows the researcher to state with a degree of statistical assuredness that the study outcomes are a consequence of either the manipulation of the independent variable or the consequence of that which was observed and analysed. In other words, the design provides a degree of certainty that an investigators observations are not haphazard or random but reflect what is considered to be a true and objective reality. Quantitative experimental designs therefore eliminate bias and the intrusion of unwanted factors that could confound findings and make them less credible (Depoy Gitlin, 2011). Although the true-experiment design is continually upheld as the best design to use to predict causal relationships, being the most ‘objective’ and ‘true’ scientific approach, it may be inappropriate for other forms of inquiry in health and human services. This is because not all research questions seek to predict causal relationships between independent and dependent variables. Moreover, in some cases, using a true-experimental design may present critical ethical concerns such that other design strategies may be more appropriate. this part doesnt quite fit yet. According to DePoy Gitlin (2011) quantitative or experimental type research define four categories namely non-experimental, quasi-experimental, pre-experimental and true experimental. In relation to the chosen articles, experimental design will be discussed as both articles are randomized controlled trials. Should we delete this paragraph? dunno. what does part 2 say about experimental and non-experimental. Depoy Gitlin (2011) suggest that a design in the experimental-type tradition should be chosen purposively because it fits the question, level of theory development, and setting or environment in which the research will be conducted. The next part of this assignment will examine two such pieces of research demonstrating purposeful use of experimental design in the specific research of curtailing psychosocial effects such as depression and mental health wellbeing of caregivers caring for someone with dementia. Experimental Research Examples The research articles chosen to critique are both RCT’s. Both are trials investigating the wellbeing of family caregivers of people with dementia. The objective of one study was to investigate the effectiveness of the intervention of a home based training programme supporting family caregivers with a family member who have dementia. The study used the â€Å"Medical Outcomes Study 36-item Short Form Survey† to collect data on physical well-being and the Chinese adaptation â€Å"Center for Epidemiologic Studies Depression Scale† to measure depressive symptoms (Kao, Huang, Huang, Lian, Chiu, Chen, Kwok, Hsu Shy, 2012). Results from the design showed positive statistical measurements for each category of physical health outcomes and a decreased rate in risk of depression for those in the experimental group compared with the control group. This study concluded that the home based caregiver training programme significantly improved the quality of life relating to heal th and decreased the risk for depressive symptoms (Kao, Huang, Huang, Lian, Chiu, Chen, Kwok, Hsu Shy, 2012) . The other RCT was investigating the effectiveness of an internet intervention â€Å"Mastery over Dementia† supporting family caregivers of people with dementia. Results from the regression analyses showed caregivers of the experimental group had decreased symptoms of depression and anxiety. Concluding that the internet course was an effective treatment (Blom, Zarit, GrootZwaaftink, Culjipers Pot, 2015). Experimental research design has strengths and weaknesses. The main strength of experimental research design is that they are the most effective for measuring cause and effect relationships (LoBiondo-Wood Harber, 2010). Due to the data obtained from experimental research designs knowledge has been applied and changes have been integrated in to action (Carr, 1994). The strength of random sampling is that it increases the possibility of being generalizable in the finding, however random selection is very time-consuming (Carr, 1994). With experimental type design the researcher remains detached from the subjects, the strength of this approach is prevention of researcher involvement guarding against any bias within the study (Carr, 1994). However they are often complex and unrealistic to measure in clinical environments and can be disruptive to peoples routine when implemented (LoBiondo-Wood Harber, 2010) . Other variables that can impact on findings is that when an intervention is bei ng administered by different people e.g. it is impossible to ensure different nurses deliver the intervention in the same way with each person (LoBiondo-Wood Harber, 2010). A further weakness is that many interventions required for studies are not agreeable to ethical consent e.g. doing an experimental design on people who smoke to measure adverse side effects (LoBiondo-Wood Harber, 2010). Due to these weaknesses many researchers resort to quazi-experimental design (Rewrite in own words)There is nothing inherently good or bad about a design. Every research study design has its particular strengths and weaknesses. The adequacy of a design is based on how well the design answers the research question that is posed. That is the most important criteria for evaluating a design. If it does not answer the research question then the design, regardless how rigorous it may appear, is not appropriate. It is also important to identify and understand the relative strength and weakness of each design element (DePoy Gitlin, 2011).

Turkey Vultures :: essays research papers

Turkey Vultures   Ã‚  Ã‚  Ã‚  Ã‚  Vultures are large birds of prey closely related to hawks and eagles. They are divided into New World vultures and Old World vultures, both belonging to the order Falconiformes. The New World vultures, in the family Cathartidae, consist of seven species in five genera. Among the New World vultures include the Cathartes aura, also known as the Turkey Vulture.   Ã‚  Ã‚  Ã‚  Ã‚  Scientists say that turkey vultures are shy, inoffensive birds. Some researchers have discovered that the bird is very helpful to the environment. Its habit of cleaning up decaying and diseased carcasses makes it a sanitary engineer par excellence, while its keen sense of smell has been pressed into service to find wasteful and dangerous gas leaks. And the vulture’s unique knack for conserving energy has intrigued scientists for years.   Ã‚  Ã‚  Ã‚  Ã‚  Although the turkey vulture has a large, turkeylike body and sporty red head, it is not even distantly related to the turkey. Instead, turkey vultures- along with their cousins in the United States, the black vulture of the South and East, and the nearly extinct California condor-belong to a group of raptors called New World vultures. Chromosome analysis shows that the New World vultures are actually more closely related to storks than to the vultures of Europe, Asia, and Africa.   Ã‚  Ã‚  Ã‚  Ã‚  Turkey vultures are remarkably successful birds. They range everywhere from parts of Canada and much of the United States to South America. At home in deserts, prairies and woodlands, they have even settled close to people in a number of urban and suburban areas.   Ã‚  Ã‚  Ã‚  Ã‚  Observed in flight, the turkey vulture appears black with the underside of its wings grayish or silvery, giving the birds a two-toned appearance. They characteristically hold their wings in a slight V, or dihedral, thus aiding identification. On rare occasions, they hold their wings flat and eagle-like which, if seen at a great distance, may cause the birds to resemble eagles. In flight, the turkey vulture holds it’s naked head, crimson-red as adults and grayish-black as immatures, downward in contrast to eagles, which hold their heads forward.   Ã‚  Ã‚  Ã‚  Ã‚  The tail of the turkey vulture extends far beyond the rear edge of its wings. They typically rock or tilt from side to side while gliding or soaring on updrafts or circling overhead. Their occasional wingbeats are powerful and labored. Turkey vultures are large birds with wingspreads of about six feet. Their wings are long, moderatly wide, and have strongly slotted tips. Typically, the wings are held slightly above a horizontal plane when the bird is aloft. This forms a characteristic dihedral which is very useful in making correct field identification. Although turkey vultures use thermals, they are more

The study of Massage/ Kinesiology Essay -- essays research papers

There are many aspects on the study and meaning of kinesiology. Some of these ways are; applied kinesiology, kinesiology medicine research, and specialized and energy kinesiology. The study kinesiology and massage therapy is believed to go hand and hand. Many will say that without the proper knowledge of kinesiology and muscle movements, you can not provide a patent with all that is needed for a proper massage. As we approach new years, many individuals are increasing their concern in health. With the healing arts increasing in popularity, individuals don’t understand the need for well-rounded therapist. Who are trained in the science of kinesiology, which includes the technique of massage to enable them to be proficient in their field. During the early 1900s, the practice of medical science became accepted in our society. Many of the Swedish massage was mingled in with those of medical doctors and medical practices. (A type of â€Å"mechano-therapy† emerged of a combination with other therapist preformed by a physician or a nurse’s assistant.) Over time, these practices were absorbed into what would be general medicine. In the 1920s Masseurs and Masseuses had lost most of their market to doctors. They mainly found work with wealthy individuals who wanted a general, relaxing form of massage. After World War ll, a group of massage operators formed the American Association of Masseurs and Masseuses. This later became the forerunner of today’s American Massage Therapy Association (AMTA). The goal of these associations is to raise the status of massage as a unique and effective treatment for healing. In the 1980s the AMTA was formed. The first thing they did was establish a code of ethics and change their titles from masseurs and masseuses to massage therapist. Now the profession of massage is enjoying renewed vigor and influence in alternative medicine. Recent trends have pointed the continuing promise and growth of massage therapy as a health care career. Applied kinesiology is the scientific study of muscular movement, physical activities and the anatomy, physiology, and mechanics of the movement of body parts. Kinesiology was first created by the American/Italian chiropractor Anthony Gil in Milano, Italy. This relatively new study has many different branches of specialized studies. Many similar goals of kinesiology are to: restore normal nerve functions, have... ...ning again. I believe that the medical aspects of life and quality in general are much more looked at today then they have been in past years. The work of massage along with the knowledge of kinesiology has improved our modern medicines and is one of the best impacts we have today for healthier lifestyles. The way physical touch in massage keeps your body and mind more together is on of the best ways to impact not only the person receiving the massage, but therapist also. If a person has never had a massage, and was to get on for the first time, I believe they will go more often, just because of the feeling you have after opposed to the feeling you had before. There is such a large amount of individuals who are looking for massage therapist. Having a natural talent will really benefit our society with a healthier and relaxing state of body and mind. I truly know that with massage/kinesiology you are able to open your bodily needs better ,and become more capable of enjoying the time you have with people you work with to make your own personality complete. These alternative medicines are the best ways to get the flow of energy moving to able yourself to feel like your own utopia.

The Fundamentals of Macroeconomics

Before being able to grasp what economics has to offer it is important to understand the terms and concepts that are frequently used in economic. This paper will consist of two parts, part one will explain six terms; gross domestic product (GDP), real GDP, nominal GDP, unemployment rate, inflation rate, and finally interest rate. Part two will consist of describing how three economic activities, such as purchasing of groceries, massive layoff of employees, and decrease in taxes. There will also be a few different examples that affect government, households, and businesses.(Part one)Start by describing the six economic terms.Gross domestic product (GDP) is the most used economic measure when it comes to determining the value of goods and services that are produced in a given year (Colander, 2010). There are four categories to GDP's consumption, government spending, investments, and net exports. The GDP reflects the total amount of both goods and services that were bought and sold, and there for can measure a country standard of living. It does not account for any goods or services that they may have in other countries.Real gross domestic product (RDP) is the final value that is given to a product or service based on the current economy. This type of GDP adjusts with the price levels in order to produce a more accurate number. Nominal gross domestic product (NDP) is the gross domestic product without taking into account inflation and can be misleading because appear to be higher than it really is because it has not been adjusted for inflation. Unemployment rate is the amount of people that are not employed and are looking for work. This reflects only the people who are ability to work, willing to work, and are looking for employment.Inflation rate is a level price of goods and services increasing. Inflation causes the value of the dollar to decrease meaning that people have less purchasing power. The increase in this rate is usually calculated annually, but can a lso be requested monthly.Interest rate is the percentage charged on loans and is charged annually. The higher the risk the borrower is the higher the interest rate this could be because of past experiences, late payments or not paying at all. If the borrower is low risk, then the interest rate will be low.(Part two)There are many activates that affect businesses, household, and government economies, here are three and examples of how purchasing of groceries, massive layoff of employees, and decrease in taxes. The purchasing of groceries by customers controls supply and demand. When the economy is good customers buy more there is greater chances of businesses making a profit, and when the economy is in a recession customer buying power is low. The recession and customers not buying groceries businesses will have to lay people off.The purchasing of groceries also affects the government because the government receives sales tax on the purchase of these items. A massive layoff of employ ees will cause the unemployment rate to go up, and when people have been layoff they purchase less and collect unemployment. This affects businesses because demand of products and services are down, and they are not making as mush product as they once did. The household is effect with no money coming in they cannot pay their bills, or supply what the family needs to live. The government is affected because the people that were laid off are collecting unemployment from the government.Decrease in taxes happens sometimes when the government has to intervene to slow down or try to reverse a recession. The government uses this policy to lower taxes to get people more money to spend so businesses can make products. When a business is producing products they are able to buy their workers and hopefully be able to hire more workers to help meet demand. With the decrease of taxes the government will have less money coming in for schools, to fix the streets, etc.Economics is a constant cycle p eople have to work to make money to buy things that the household needs. Businesses need workers to produce products  or services, which they are paid to do. The government relies on the taxes from workers, and businesses. Whenever money is spent there is going to be someone at a loss and someone at a gain, but it seems to always to come around full circle.